How to Tie Two Fishing Lines Together: Fishing Knot 101

By Richard | Fishing Advice

how to tie two fishing lines together
Spread the love

Anglers spend a lot of time, effort, and money on their fishing gear, such as rods, reels, and fishing lines.

However, it is very seldom that fishing knots are given the right attention since they are crucial to the success of the fishing trip.

Tying a fishing knot is an essential skill since it serves as a vital connection between the fish and the angler.

Correctly tying a knot and knowing the right knot to use in a particular situation is critical to every angler's fishing success.

Knowing how to tie two fishing lines together will prove to be beneficial in all your fishing activities.

Fishing Knots to Know

If you are a newbie in fishing, you probably know one or two basic fishing knots the first time you went out fishing.

If you want to become a real angler, though, you have to add more fishing knot-tying knowledge for you to be prepared in whatever situation while on the water.

Here are some of the fishing knots you need to master.

1. Improved Clinch Knot

You usually use this knot to tie the line to a hook, and this is how you do it:

  1. The first step is to thread the fishing line through the hook's eye then wrap the loose end around the fishing line for five to seven times.
  2. Insert the line's loose end through the loop nearest to the hook's eye then thread it back the slack part of the line.
  3. Pull the line on both ends to make it tight and trim the loose end as necessary.

2. Palomar Knot

The Palomar knot is also useful for tying the line to a hook. Here's what you need to do:

  1. Double the fishing line and form a loop, then push it through the hook's eye.
  2. Tie an overhand knot loosely and pass the loop over the loop's end.
  3. Pull the fishing line to tighten it and trim any loose end of the fishing line if needed.

3. Turle Knot

This knot is for tying thin fishing lines to a tiny hook, and to achieve, follow these steps:

  1. Run the fishing line through the eye of the fish hook then tie a double overhand knot loosely in the line's end.
  2. Pass the loop over the hook, pulling it tight around the eye.

4. Blood Knot

This knot is used for joining two fishing line sections together. To create this knot, you must:

  1. Get two fishing lines and merge them by wrapping the first line over the other five times then do it the other way around by wrapping the second to the first line, five times.
  2. Move each loose end to the center in between the two lines and pull each line snugly tight.

5. Double Surgeon's Loop

This knot is for making a loop at the end of the fishing line.

  1. Make a double line by folding over the end of the line then one overhand knot.
  2. Run the loop through the hole one more time into the overhand knot then moisten it to tighten.

6. Wire Line to Mono Knot

This line is used for connecting a wire-type line to a monofilament line.

  1. Make a bend at the wire fishing line's end by folding about four inches of the line over itself.
  2. Run monofilament line through the center of the bend and wrap it once over the base of the curve.
  3. Make seven close turns over both lines with the use of the monofilament.
  4. Move the monofilament's loose end above its middle strand and below the wire fishing line before pulling it snug.

7. Tucked Sheet Bend

This type of knot is for attaching the fishing line to the leader coil or snelled hook to the fishing line.

All you need to do is run the end of the fishing line through the loop, make a basic sheet bend knot, and tighten it until snug.

8. Snelling a Hook

This type of knot is for connecting a monofilament line to a hook. What you need to do are:

  1. Run the end of the fishing line through the hook's eye twice, forming a loop that hangs on the side of the hook.
  2. Wrap the loop over the hook and make five to ten tight coils.
  3. Hold the coil in position as you hold it with one finger.
how to tie two fishing lines together

How to Tie Two Fishing Lines Together

There is a long list of different fishing knots that you can use to tie two lines together, whether you want to tie the main to the leader line or connect two fishing lines of different sizes.

Some knots are used for a specific task like the Albright knot, which is typically used in fly fishing activities.

What Is the Best Knot to Join Two Lines

When you are out fishing and don't have the luxury of time, the surgeon's knot is considered one of the best and most reliable knots to use when tying two fishing lines together.

Surgeon's Knot

The surgeon's knot is usually the first knot learned by anglers to tie two lines together since it is simple yet reliable.

You can make a surgeon's knot by placing two fishing lines alongside each other, overlapping it by six inches, then form a coil using both fishing lines.

Make a double overhand knot, pull the ends of each line into the loop and then bind the ends around the fishing lines and then pull them into the circle again.

Tighten the knot by pulling the ends of the fishing lines, then trim the ends as close to the knot as possible.

However, if you have enough time, you might use the more complicated double uni knot since it is more durable than the surgeon's knot.

How Do You Tie a Uni Knot With Two Lines

This knot type can be used if you need to tie two fishing lines with whether it's of the same size or not and with different materials.

Here's how to tie a uni or a double uni knot using two fishing lines.

  1. Put two fishing lines side by side with the ends overlapping by six inches.
  2. Make a loop using the end of one of the fishing lines.
  3. Hold the end of the line using your fingertips as you circle it back then go up and over the lines that overlap.
  4. Place the end of the loop opposite the parallel lines right in the middle where the two fishing lines overlap.
  5. Hold the end of the loop and pass it six times, wrapping it around to where the paralleled lines overlap.
  6. Pull the wire through the middle of the circle, leaving it loose as you do so.
  7. Pull the tag end, which is the one used to make the uni knot and grab it firmly to tighten the knot.
  8. Repeat the procedure on the other end of the line to create the same knot on the other side.
  9. Pull each end of the lines separately, going in separate directions to bring those two knots together.
  10. Ensure that you have tightened the knot before cutting the excess line.

What Fishing Knot Is the Strongest?

When choosing the most reliable fishing knot, anglers agree that the Palomar knot is straightforward but one of the most effective knots used by amateurs and professionals alike.

This reliable fishing knot is most suitable for braided lines, monofilaments, and fluorocarbon, as it is easy to do once you have mastered it.

Conclusion

Learning how to tie two fishing lines together is very important for all anglers, which they should master before attempting to go out and fish.

Anglers should learn and practice various fishing knots to ensure they have this information, not just their fishing gear.

Knowing how to put a fishing line on a reel will also allow you to practice making fishing knots for your next fishing adventure.

About the Author

Leave a Comment:

Leave a Comment: